/ REGISTER HERE shopping cart 0 Item(s)
sculpture supply
sculpture supply canada about us contact us ordering events news techinical info videos media
SEARCH
PATINAS JAX CHEMICAL
» Jax Aluminum Blackener
» Jax Antique Rust
» Jax Black
» Jax Brass Copper and Gold Cleaner
» Jax Brass Copper Gold and Marble Cleaner
» Jax Brown
» Jax Brown-Black
» Jax Copper Plating Solution
» JAX Dichroic FX Black
» Jax Flemish Gray-Black
» Jax Gold Finish
» Jax Green Patina
» Jax Instant Brass and Copper Cleaner
» Jax Instant Silver Cleaner
» Jax Iron Steel Nickel Blackener
» Jax Pewter Black
» Jax Rust Preventer
» Jax Rust Remover
» Jax Silver Blackener
» Jax Silver Cleaner and Polish
» Jax Silver Plating Solution
» Jax Tarnish Preventer
Home : Patinas Jax Chemical : Jax Silver Blackener
 

* Price: $25.72

Qty
*All prices are in Canadian funds.
JAX Silver Blackener Pint (801835)
JAX Silver Blackener Patina produces an dark antique finish on silver and gold. Size: Pint Color: Black

APPLICATION INSTRUCTIONS


  • Metal surface must be cleaned of all lacquer, oil, wax, and grease.
  • Gloves should be worn to prevent surface contamination.
  • JAX Silver Blackener should be tested on metal surface to determine surface suitability and reaction.
  • JAX Silver Blackener must be applied as a cold patina, do not coat heated or hot metal surfaces.
  • Apply patina to surface with a bristle brush. Optionally, dip the entire object into the solution. JAX Silver Blackener will react quickly with the metal surface. When opting to perform a dip patina, the solution may be diluted with distilled water to neutralize the reaction intensity. Dilution ratios can vary depending on desired darkening effect. Do not dilute with water if brushing the solution onto metal surface.
  • Leaving the patina for an extended period of time on the metal surface will result in the JAX Silver Blackener to rub off the metal easily.
  • Once the deisred darkening has been achieved, rinse the metal well with distilled water and dry surface.
  • Steel Wool or 3M Scotch-Brite Ultra Fine Pads can be used to alter the intensity of the patina darkness on the metal surface as desired. Additional JAX Silver Blackener solution may be re-applied should you need to re-darken the metal surface.
  • Oil, wax, or lacquer sealer may be applied to metal surface. JAX Silver Blackener Patina may also be left untreated if desired.
  • Although JAX products do not expire, they must be stored at room temperature in tightly sealed original containers.