*All prices are in Canadian funds.
Mold Star 19T Pint kit 2Lbs (801616)
Mold Star 19T is an easy to use translucent platinum cure silicone that is mixed 1A:1B by volume (no weighing scale necessary). Features a relatively low viscosity and vacuum degassing is not required for most applications. Mold Star 19T cures to a soft, strong rubber that is tear resistant and exhibits very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Mold Star 19T silicone can be thickened with THI-VEX thickener for brush-on application and effects. An infinite number of color effects can be achieved by adding Silc Pig silicone pigments or Cast Magic effects powders. Mold Star 19T is heat resistant up to 450F (232C) and is suitable for casting low-temperature melt metal alloys. Note: This product will not cure against surfaces containing sulfur, even when sealed.
Pot Life: 3 mins. Cure Time: 12 mins. Shore Hardness: 19A Size: Pint Kit 2Lbs.
Guide to Making Silicone Molds from SLA 3D Printed Models
Mold Star 20T
Mold Star 31T