/ REGISTER HERE shopping cart 0 Item(s)
sculpture supply
sculpture supply canada about us contact us ordering events news techinical info videos media
» Accelerators
» EPOXEE Kleener
» Inhibit X
» Mold Cleaner 2508
» Mold Max 30 Part B Only
» NOVOCS Silicone Solvent
» SLACKER Plat Sil Softener
» Slide STD Surface Tesioin Diffuser
» Slo-Jo Plat Silicone Inhibitor
» SO-FLEX Softener
» Sun Devil UV Enhancer
» Thickeners
» Thinners
» XTEND-iT Dry Gas Spray
Home : Mold Making Additives : Mold Cleaner 2508

* Price: $85.43

*All prices are in Canadian funds.
Mold Cleaner 2508 Gallon 8.31Lb (801579)
Mold Cleaner 2508 is a unique blend of active solvents formulated to remove build-up associated with molding thermoset resins such as polyurethanes, epoxies, polyester and vinyl esters. This cleaner will clean mold release and resin residue from steel and aluminum surfaces. Mold Cleaner 2508 does not contain chlorinated or fluorocarbon solvents. Size: Gallon 8Lb

Field tests have shown that 2508 exhibits excellent results when compared to methylene chloride or other blends of chlorinated solvents. Mold Cleaner 2508 uses ingredients which are both low in toxicity and environmental hazards and with low odor.

  • Do not use on molds heated above 150F without proper eye and respiratory safety equipment.
  • Brush on the mold surface liberally and allow time to penetrate.
  • Allow to remain until the build-up is softened or dissolved.
  • Wipe with a clean rag and apply a second coat and wipe after 3 minutes.
  • On molds other than steel or aluminum, test for compatibility on a small section on test panel before using.

Thorough cleaning of molded parts is required prior to staining, painting or bonding.


  • Use adequate protection when handling any release solvent system.
  • Skin contact may cause dryness.
  • Wear safety glasses or their equivalent to prevent eye injury.
  • Avoid inhalation of excessive amount of solvent vapor.