/ REGISTER HERE shopping cart 0 Item(s)
sculpture supply
sculpture supply canada about us contact us ordering events news techinical info videos media
» Accelerators
» EPOXEE Kleener
» Inhibit X
» Mold Cleaner 2508
» Mold Max 30 Part B Only
» NOVOCS Silicone Solvent
» SLACKER Plat Sil Softener
» Slide STD Surface Tesioin Diffuser
» Slo-Jo Plat Silicone Inhibitor
» SO-FLEX II Softener
» Sun Devil UV Enhancer
» Thickeners
» Thinners
» XTEND-iT Dry Gas Spray
Home : Mold Making Additives : Accelerators

Call for Pricing

*All prices are in Canadian funds.


Fast Cat 30 6 Gallon 50 Lb (798803)
Fast Catalyst & Cure Accelerator for Mold Max 30 Silicone Rubber. FastCat 30 silicone rubber catalyst will accelerate the cure time of Mold Max 30 silicone rubber. Used in place of (or in combination with) Mold Max 30 regular Part B catalyst, FastCat 30 will reduce the demold time from overnight to as little as 30 minutes.

Note: Working time is reduced in proportion to the amount of FastCat 30 added. Adding FastCat reduces the library and production life of the cured rubber vs. our Mold Max regular catalyst.

Example: When used alone as Part B for Mold Max 30 (100A:10B pbw mix ratio) instead of regular catalyst FastCat 30 reduces the pot life of Mold Max 30 from 45 minutes to 10 minutes and the demold time from 24 hours to 1 hour.

If the amount of FastCat 30 Part B is increased to 15% (100A:15B pbw), the pot life is reduced to 5 minutes and the demold time to 30 minutes.