*All prices are in Canadian funds.
duoMATRIX-G Gal Kit 9.7Lb (790000)
duoMatrixâ€“G is a new polymer additive system that greatly enhances the physical properties of alpha gypsum products. duoMatrix-G reduces the demold and drying time of gypsum and drastically reduces water permeability making it suitable for both interior and exterior applications. Sold as Gallon Kit.
Kit contains: C-1 Latex, C-2 Resin, C-3 Hardener. Hydrocal FGR95 alpha gypsum sold separately.
PRODUCT ADVISORY: KEEP FROM FREEZING.
May require heated service subject to weather conditions. Additional shipping charges will apply. In such event customer will be notified.
Product must be sealed for exterior use - see technical bulletin. Matrix-G has less odor and yields elements that are a brighter white than competing products. Note: duoMatrix â€“C is also available as a one component additive for concrete/GFRC applications.
Matrix-G is easy to use and can be cast solid, laid up by hand with chopped fiber or sprayed. Fully cured pieces can be painted, sanded, machined and polished. Matrix-G is used to make lightweight pieces that are very strong and water-resistant.
Applications include making architectural elements, reproducing sculpture and special effects.
Vibrant colors are possible by adding pigments. Metal powders (bronze, pewter, brass, etc.) can be added to give the look of real metal castings at a fraction of the cost. You can duplicate the look of marble or ceramic by adding inexpensive fillers.