/ REGISTER HERE shopping cart 0 Item(s)
sculpture supply
sculpture supply canada about us contact us ordering events news techinical info videos media
» Adjustable Sled Guides
» Bow Cutter
» Engraver
» EPS Foam Blocks & Sheets
» EPS Foam Discs
» EPS Foam Faceless Head
» EPS Foam Female Head
» EPS Foam Glue
» EPS Foam Half Balls
» EPS Foam Male Head
» EPS Foam Rods
» EPS Foam Solid Balls
» EPS Foam Wreaths
» Foam Carving Kits
» Foam Coatings
» Foam Sculpting Tools
» Hot Knife Ceramic Stops
» Hot Knife Replacement Blades
» Power Supply
» Replacement Cutting Wires
» Scroll Tables
» Wire Tensioner
» XPS Foam Cones
» XPS Foam Eggs
Home : Foam Carving Supplies : Foam Coatings

* Price: $11.59

*All prices are in Canadian funds.


Bounce Foam Coat Rubberizer 8oz (226922)
Bounce Foam Coat Rubberizer makes Foam Coat flexible, highly resistant to cracking on impact, weather proof, strong with application of very thin coats, and improves adhesion to most porous materials.

May require heated service subject to weather conditions. Additional shipping charges will apply. In such event customer will be notified.

Mix Bounce Rubberizer liquid 1:1 with dry Foam Coat. Add just a little Foam Coat to make a paste glue for uneven surfaces. Bounce can be used alone as a waterproof coating.

MIXING Use Bounce with no added water for maximum flexibility. Foam Coat becomes more flexible when no or less water is added to the Bounce Rubberizer. Start with 1 part liquid to 1 part Foam Coat, and thin or thicken as desired. Thinning the Foam Coat with more Bounce will not weaken it, and will allow very strong thin layers to be applied, so you don't lose details. Try a mixture of 9 parts Bounce to one part Foam Coat for a super rubbery coating. Thin layers can be applied to verticle and inverted surfaces with little or no sagging.

APPLICATION Fill holes with pasty mixture. To coat large areas add more liquid until thin enough to apply with a paint brush. May be applied as thick as 3/8 inch, but multiple coats are stronger. Looks like smooth stone when dry. Texture surfaces before coating sets. Bounce Rubberizer is compatible with Grit Texturizers.

SET TIME Use within 15 mins. Sets up in 30 mins. Maximum bond and strength in 1 day.

CLEAN-UP Immediately clean tools and brushes with soapy water.

FINISHING Paint or stain as desired.

Related Products:
EPS Expanded Polystyrene Foam Blocks