/ REGISTER HERE shopping cart 0 Item(s)
sculpture supply
sculpture supply canada about us contact us ordering events news techinical info videos media
SEARCH
EPOXY SYSTEMS
» Epic Epoxy Thinner
» EpoxAcast 650 Black
» EpoxAcast 650 Mineral Filled
» EpoxAcast 655 Aluminum Fill
» EpoxAcast 670 High Temp
» EpoxAcast 690 Clear
» EpoxAcoat GREY
» EpoxAcoat HT
» EpoxAcoat RED
» EpoxAmite 101 Fast
» EpoxAmite 102 Medium
» EpoxAmite 103 Slow
» EpoxAmite Dispensing Pumps
» EpoxAmite HT
» Epoxy Hardener 101 Fast
» Epoxy Hardener 102 Medium
» Epoxy Hardener 103 Slow
» Epoxy Hardener HT
» Epsilon EPS Coating
» Epsilon PRO Coating
» Flexer Epoxy Flexibilizer
» Free Form Air Epoxy Putty
» Free Form Detailer Fluid
» Free Form Habitat Black
» Free Form Habitat Fire Safe
» Free Form Habitat FLEX FR
» Free Form Sculpt Epoxy Putty
» Habitat Cast N Coat
» Habitat Folding Powder
» Tarbender Encapsulant
» XTC-3D Print Epoxy Coating

PRODUCTS

Home : Epoxy Systems : XTC-3D Print Epoxy Coating

PreviousNextTotal of 4. Displaying products 1 thru 4.

 
XTC-3D Print Epoxy Coating 6.4oz kit (800479)
XTC-3D is a two-part epoxy coating made especially for eliminating striations on 3D printed parts. It dramatically reduces the amount of post finishing work necessary to remove striations and smooth the surface of the 3D print. Can be applied to both SLA and SLS prints and works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. XTC-3D is mixed 2A:1B by volume and the mixed resin brushes easily onto any 3D print surface. It holds a vertical surface extremely well and very little is needed to cover a large area. XTC-3D dries clear in thin layers and slightly yellow in thick sections. Can be thinned with denatured alcohol. Coverage: 1oz.(28.3 grams) of mixed material will cover 101 sq.in.(651 sq.cm.) applied at 1/64in.(.04cm) thickness. Working time is 10 minutes if you mix and leave the resin in a cup. You can extend the working time to 15 minutes by pouring the material into a flat container and reduce the mass concentration. XTC-3D cures in 2 to 3.5 hours (depending on mass) to a smooth glass-like, high gloss finish. To eliminate the high gloss finish, lightly sand or buff with steel wool. Color can be added by mixing XTC-3D with SO-Strong, UVO or Ignite colorants. You can add fillers, metal powders, Cast Magic or Glow Worm for a variety of finished effects. You can also paint XTC-3D with acrylic enamel paints. You can coat many surfaces than just those of 3D prints such as EPS, EPDM and urethane foam, wood, plaster, fabric, cardboard, aluminum, steel and more. Size: 6.4oz kit

Qty
* Price: $15.04
More Info
 
XTC-3D Print Epoxy Coating 24oz kit (800480)
XTC-3D is a two-part epoxy coating made especially for eliminating striations on 3D printed parts. It dramatically reduces the amount of post finishing work necessary to remove striations and smooth the surface of the 3D print. Can be applied to both SLA and SLS prints and works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. XTC-3D is mixed 2A:1B by volume and the mixed resin brushes easily onto any 3D print surface. It holds a vertical surface extremely well and very little is needed to cover a large area. XTC-3D dries clear in thin layers and slightly yellow in thick sections. Can be thinned with denatured alcohol. Coverage: 1oz.(28.3 grams) of mixed material will cover 101 sq.in.(651 sq.cm.) applied at 1/64in.(.04cm) thickness. Working time is 10 minutes if you mix and leave the resin in a cup. You can extend the working time to 15 minutes by pouring the material into a flat container and reduce the mass concentration. XTC-3D cures in 2 to 3.5 hours (depending on mass) to a smooth glass-like, high gloss finish. To eliminate the high gloss finish, lightly sand or buff with steel wool. Color can be added by mixing XTC-3D with SO-Strong, UVO or Ignite colorants. You can add fillers, metal powders, Cast Magic or Glow Worm for a variety of finished effects. You can also paint XTC-3D with acrylic enamel paints. You can coat many surfaces than just those of 3D prints such as EPS, EPDM and urethane foam, wood, plaster, fabric, cardboard, aluminum, steel and more. Size: 24oz kit

Qty
* Price: $32.90
More Info
 
XTC-3D Print Epoxy Coating Gallon kit (800481)
XTC-3D is a two-part epoxy coating made especially for eliminating striations on 3D printed parts. It dramatically reduces the amount of post finishing work necessary to remove striations and smooth the surface of the 3D print. Can be applied to both SLA and SLS prints and works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. XTC-3D is mixed 2A:1B by volume and the mixed resin brushes easily onto any 3D print surface. It holds a vertical surface extremely well and very little is needed to cover a large area. XTC-3D dries clear in thin layers and slightly yellow in thick sections. Can be thinned with denatured alcohol. Coverage: 1oz.(28.3 grams) of mixed material will cover 101 sq.in.(651 sq.cm.) applied at 1/64in.(.04cm) thickness. Working time is 10 minutes if you mix and leave the resin in a cup. You can extend the working time to 15 minutes by pouring the material into a flat container and reduce the mass concentration. XTC-3D cures in 2 to 3.5 hours (depending on mass) to a smooth glass-like, high gloss finish. To eliminate the high gloss finish, lightly sand or buff with steel wool. Color can be added by mixing XTC-3D with SO-Strong, UVO or Ignite colorants. You can add fillers, metal powders, Cast Magic or Glow Worm for a variety of finished effects. You can also paint XTC-3D with acrylic enamel paints. You can coat many surfaces than just those of 3D prints such as EPS, EPDM and urethane foam, wood, plaster, fabric, cardboard, aluminum, steel and more. Size: Gallon kit (12 Lbs)

Qty
* Price: $156.02
More Info
 
XTC-3D Print Epoxy Coating Five Gallon kit (800482)
XTC-3D is a two-part epoxy coating made especially for eliminating striations on 3D printed parts. It dramatically reduces the amount of post finishing work necessary to remove striations and smooth the surface of the 3D print. Can be applied to both SLA and SLS prints and works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. XTC-3D is mixed 2A:1B by volume and the mixed resin brushes easily onto any 3D print surface. It holds a vertical surface extremely well and very little is needed to cover a large area. XTC-3D dries clear in thin layers and slightly yellow in thick sections. Can be thinned with denatured alcohol. Coverage: 1oz.(28.3 grams) of mixed material will cover 101 sq.in.(651 sq.cm.) applied at 1/64in.(.04cm) thickness. Working time is 10 minutes if you mix and leave the resin in a cup. You can extend the working time to 15 minutes by pouring the material into a flat container and reduce the mass concentration. XTC-3D cures in 2 to 3.5 hours (depending on mass) to a smooth glass-like, high gloss finish. To eliminate the high gloss finish, lightly sand or buff with steel wool. Color can be added by mixing XTC-3D with SO-Strong, UVO or Ignite colorants. You can add fillers, metal powders, Cast Magic or Glow Worm for a variety of finished effects. You can also paint XTC-3D with acrylic enamel paints. You can coat many surfaces than just those of 3D prints such as EPS, EPDM and urethane foam, wood, plaster, fabric, cardboard, aluminum, steel and more. Size: Five Gallon kit (120 Lbs)

Qty
* Price: $1419.33
More Info
 

PreviousNext

*All prices are in Canadian funds.