|
Smooth-Sil 935 Gallon Kit 11# (799518)
Smooth-Sil 935 is a Platinum Silicone (addition cure) with a shore hardness of 35. Smooth-On Platinum Silicones (platinum curative) cure at room temperature with no shrinkage. These silicones exhibit good chemical, abrasion and heat resistance. Materials such as plasters, concrete, wax, low-melt metal alloys or resins (urethane, epoxy or polyester) can then be cast into these silicone rubbers without a release agent. Smooth-Sil Platinum Silicones are used for rapid prototyping, wax casting (foundries and candle makers), architectural restoration and for casting concrete.
|
|
Smooth-Sil 935 5 Gal Kit 55# (799519)
Smooth-Sil 935 is a Platinum Silicone (addition cure) with a shore hardness of 35. Smooth-On Platinum Silicones (platinum curative) cure at room temperature with no shrinkage. These silicones exhibit good chemical, abrasion and heat resistance. Materials such as plasters, concrete, wax, low-melt metal alloys or resins (urethane, epoxy or polyester) can then be cast into these silicone rubbers without a release agent. Smooth-Sil Platinum Silicones are used for rapid prototyping, wax casting (foundries and candle makers), architectural restoration and for casting concrete.
|
|
Smooth-Sil 935 Drum Kit 550# (799520)
Smooth-Sil 935 is a Platinum Silicone (addition cure) with a shore hardness of 35. Smooth-On Platinum Silicones (platinum curative) cure at room temperature with no shrinkage. These silicones exhibit good chemical, abrasion and heat resistance. Materials such as plasters, concrete, wax, low-melt metal alloys or resins (urethane, epoxy or polyester) can then be cast into these silicone rubbers without a release agent. Smooth-Sil Platinum Silicones are used for rapid prototyping, wax casting (foundries and candle makers), architectural restoration and for casting concrete.
|
YOUR CART 
