|
Rebound 40 Pint Kit 2# (a)1-11 (799306)
Rebound® 25 and Rebound® 40 are easy-to-use platinum-cure silicone rubbers which self-thicken for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound® rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber. Rebound® 25 is soft, flexible and is good for making molds of models with deep undercuts. Depending on model configuration, Rebound® 25 can be inverted as a glove molds. Rebound® 40 is harder and less flexible. These products are compatible. For example, you can apply two coats of Rebound® 25 and back it up with two coats of Rebound® 40. Note: This product will not work with modeling clays containing sulfur. Kit Coverage: .87 sq.ft. (125.28 sq.in.) @ 3/8" thick.
|
|
Rebound 40 Gallon Kit 18# (799307)
Rebound® 25 and Rebound® 40 are easy-to-use platinum-cure silicone rubbers which self-thicken for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound® rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber. Rebound® 25 is soft, flexible and is good for making molds of models with deep undercuts. Depending on model configuration, Rebound® 25 can be inverted as a glove molds. Rebound® 40 is harder and less flexible. These products are compatible. For example, you can apply two coats of Rebound® 25 and back it up with two coats of Rebound® 40. Note: This product will not work with modeling clays containing sulfur. Kit Coverage: 7 sq.ft. @ 3/8" thick.
|
|
Rebound 40 Five Gallon Kit 90# (799308)
Rebound® 25 and Rebound® 40 are easy-to-use platinum-cure silicone rubbers which self-thicken for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound® rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber. Rebound® 25 is soft, flexible and is good for making molds of models with deep undercuts. Depending on model configuration, Rebound® 25 can be inverted as a glove molds. Rebound® 40 is harder and less flexible. These products are compatible. For example, you can apply two coats of Rebound® 25 and back it up with two coats of Rebound® 40. Note: This product will not work with modeling clays containing sulfur. Kit Coverage: 35 sq.ft. @ 3/8" thick.
|
|
| Min Qty |
* Price |
| 1 |
$897.26 |
| 6 |
$854.53 |
|
|
YOUR CART 
