/ REGISTER HERE shopping cart 0 Item(s)
sculpture supply
sculpture supply canada about us contact us ordering events news techinical info videos media
SEARCH
MOLD MAKING ADDITIVES
» Accelerators
» EPOXEE Kleener
» Inhibit X
» Mold Cleaner 2508
» Mold Max 30 Part B Only
» NOVOCS Silicone Solvent
» SLACKER Plat Sil Softener
» Slide STD
» Slo-Jo Plat Silicone Inhibitor
» SO-FLEX Softener
» Sun Devil UV Enhancer
» Thickeners
» Thinners
» XTEND-iT Dry Gas Spray

PRODUCTS

Home : Mold Making Additives

PreviousNextTotal of 46. Displaying products 31 thru 40.

 
Sun Devil Gallon 8Lb UV Resistance Enhancer (799690)
Permanent UV stability in liquid urethane products is not possible. Ultimately, the only option is to delay the degrading effects (color change and surface break down) of ultraviolet light on these materials. Sun Devil® is a one component liquid additive that will slow color change and physical degradation due to UV exposure for many Smooth-On liquid urethane products. Sun Devil® is added by weight (gram scale required) to the urethane rubber, plastic or foam system. Results will vary and will depend on intensity and duration of exposure to UV light to the cured material over time.

Qty
* Price: $474.12
More Info
 
Sun Devil 5 Gallon 40Lbs UV Resistance Enhancer (799691)
Permanent UV stability in liquid urethane products is not possible. Ultimately, the only option is to delay the degrading effects (color change and surface break down) of ultraviolet light on these materials. Sun Devil® is a one component liquid additive that will slow color change and physical degradation due to UV exposure for many Smooth-On liquid urethane products. Sun Devil® is added by weight (gram scale required) to the urethane rubber, plastic or foam system. Results will vary and will depend on intensity and duration of exposure to UV light to the cured material over time.

Qty
* Price: $2039.28
More Info
 
EPOXEE Kleener 16oz (799706)
E-POX-EE KLEENER is a unique industrial hand cleaner made especially for removing unreacted liquid epoxy, polyester, urethanes and other resins from the skin. It will also remove liquid paint, lacquer and grease.
Directions for Best Results DO NOT WET HANDS BEFORE USING
  • Dispense a liberal amount of Kleener onto the hands.
  • Work well into resin contaminated areas.
  • Wash hands with soap and water.
  • Repeat as necessary.

    Qty
    * Price: $11.29
More Info
 
Slo-Jo Platinum Silicone Cure Inhibitor Pint 1Lb (799764)
Slo-Jo® Platinum Silicone Cure Retarder is an additive designed to extend the pot life (working time) of Smooth-On platinum silicone rubber products and Soama Foama® silicone foam without affecting the ultimate physical properties. The retarder is added by weight to Part B and should be thoroughly mixed into Part B before adding Part A. Note: Cure time of the platinum silicone rubber will be extended in proportion to the amount of Slo-Jo® added. Adding more than 4% Slo-Jo® of Part B may reduce the ultimate physical properties of the cured rubber. See technical bulletin.

Qty
* Price: $26.95
More Info
 
Slo-Jo Platinum Silicone Cure Inhibitor Gallon 8Lb (799765)
Slo-Jo® Platinum Silicone Cure Retarder is an additive designed to extend the pot life (working time) of Smooth-On platinum silicone rubber products and Soama Foama® silicone foam without affecting the ultimate physical properties. The retarder is added by weight to Part B and should be thoroughly mixed into Part B before adding Part A. Note: Cure time of the platinum silicone rubber will be extended in proportion to the amount of Slo-Jo® added. Adding more than 4% Slo-Jo® of Part B may reduce the ultimate physical properties of the cured rubber. See technical bulletin.

Qty
* Price: $166.42
More Info
 
Inhibit X Pint 1 Lb (799789)
Inhibit X® is a single component, low-viscosity liquid that provides an added measure of protection against cure inhibition when pouring platinum silicone rubbers over many surfaces including spray adhesives, tapes, wood surfaces, some plastics, SLA resins and others.

Qty
* Price: $63.69
More Info
 
NOVOCS Gloss Silicone Solvent Pint 0.75 Lbs (799917)
NOVOCS solvents are low viscosity silicone solvents that evaporate quickly and contain no VOC's (volatile organic compounds). NOVOCS is particulary useful in thinning down Psycho Paint® silicone paint base to apply via brush or airbrush to cured platinum silicone rubber (Dragon Skin & EcoFlex) props and prosthetics. When used as a solvent for thinning silicone paints or surface coatings, NOVOCS Gloss will leave a gloss finish. NOVOCS silicone solvent is used by silicone mask makers, silicone doll makers, special effects fabricators and silicone artists.

Qty
* Price: $22.95
More Info
 
NOVOCS Gloss Silicone Solvent Gallon 6 Lbs (799918)
NOVOCS solvents are low viscosity silicone solvents that evaporate quickly and contain no VOC's (volatile organic compounds). NOVOCS is particulary useful in thinning down Psycho Paint® silicone paint base to apply via brush or airbrush to cured platinum silicone rubber (Dragon Skin & EcoFlex) props and prosthetics. When used as a solvent for thinning silicone paints or surface coatings, NOVOCS Gloss will leave a gloss finish. NOVOCS silicone solvent is used by silicone mask makers, silicone doll makers, special effects fabricators and silicone artists.

Qty
* Price: $112.95
More Info
 
NOVOCS Gloss Silicone Solvent Five Gallon 30 Lbs (799919)
NOVOCS solvents are low viscosity silicone solvents that evaporate quickly and contain no VOC's (volatile organic compounds). NOVOCS is particulary useful in thinning down Psycho Paint® silicone paint base to apply via brush or airbrush to cured platinum silicone rubber (Dragon Skin & EcoFlex) props and prosthetics. When used as a solvent for thinning silicone paints or surface coatings, NOVOCS Gloss will leave a gloss finish. NOVOCS silicone solvent is used by silicone mask makers, silicone doll makers, special effects fabricators and silicone artists.

Qty
* Price: $469.00
More Info
 
NOVOCS Matte Silicone Solvent Pint 0.75 Lbs (799920)
NOVOCS solvents are low viscosity silicone solvents that evaporate quickly and contain no VOC's (volatile organic compounds). NOVOCS is particulary useful in thinning down Psycho Paint® silicone paint base to apply via brush or airbrush to cured platinum silicone rubber (Dragon Skin & EcoFlex) props and prosthetics. When used as a solvent for thinning silicone paints or surface coatings, NOVOCS Matte will leave a matte finish. Increasing the amount of NOVOCS Matte will create a more matte finish on the cured surface. NOVOCS silicone solvent is used by silicone mask makers, silicone doll makers, special effects fabricators and silicone artists.

Qty
* Price: $22.95
More Info
 

PreviousNext

*All prices are in Canadian funds.