*All prices are in Canadian funds.
Createx Fluorescent Sunburst 4oz (801241)
Neon colors emit a glow (fluoresce). Fluorescent Colors work best over a white base such as Createx Opaque White or AutoBorne Sealer White. Fluorescent colors are NOT lightfast. The color's fluorescence is due to the pigment being in a rapid state of decay. Fluorescent colors are not intended for permanent finishes. For best results apply over a color-keyed base color to hide fade of fluorescent pigment. Fluorescent Colors are very transparent out of the bottle and may be reduced with 5601 Transparent Base or 4012 High Performance Reducer to increase transparency and assist flow & atomization with smaller airbrush tip-sizes. Add 4030 Mix Additive to Createx Airbrush Colors for improved spray performance and adhesion on plastic, vinyl and application onto hard-surfaces. Operate at 40 to 50psi with 0.5mm tip. For use on hard surfaces, plastic and vinyl, mix with 4030 Mix Additive 10% to 30% parts by volume. Color: Sunburst Size: 4oz
Use Createx Illustration 5092 Flexible Adhesion Promoter on latex prosthetics.
Createx Airbrush Color Chart
Createx Illustration Color Chart_Bloodline
Createx Wicked Color Chart
Createx Reduction Matrix
Createx Illustration Colors_Reduction Tech Sheet
Createx Colors Hard Surface Application Guide
Createx Airbrush-Wicked Textile Application Guide
PRODUCT ADVISORY: KEEP FROM FREEZING.
May require heated service subject to weather conditions. Additional shipping charges will apply. In such event customer will be notified.