Create Coat 3 Lb (800699)
Create Coat protects, beautifies and adheres to polystyrene foams and Foam Coat to add a rock-hard cement-like final foam finish coat. Use directly on foam or as a finish coating over All Purpose or Exterior Foam Coat. Create Coat makes it easy to make foam finishes look like wood, stone, metal and bone. Compatible with our Boost and Grit. Perfect base for creating gorgeous natural tints with acid stains or StainFast water based stain system. Does not stick to itself nearly as well as other Foam Coat coatings. Surface must be sanded between coats. Use indoors or outdoors. Fire, rain, freeze, and sun resistant. Size: 3 Lb
Mix 2 parts water to 5 parts powder until you have a smooth paste. Do not over-mix. APPLICATION: From 1/32 inch to 1/2 inch thickness. Use a brush or trowel. Try texturing surface before coating sets. SET TIME: Use within 30 mins. Hard in 1 to 2 hours. Maximum strength and bond in 24 hours. FINISHING: Smooth or texture while drying. Sandable. Stain or paint. Add Grit for a rock-like surface. CLEAN-UP: Clean tools etc. with soapy water before coating hardens.
COVERAGE: Based on 3 Lbs of Create Coat
1/64" thickness, 36 sq ft
1/16" thickness, 9 sq ft
1/4" thickness 2.25 sq ft