*All prices are in Canadian funds.
Epsilon EPS Coating Quart Kit 2.8# (799833)
EPSILON® is a thixotropic epoxy coating that self thickens for brushing onto a variety of surfaces without sagging. Parts A and B mix together easily, and the mixture wets out uniformly. This product is not sensitive to moisture or humidity. EPSILON® cures at room temperature to an impact resistant plastic which exhibits good compressive and flexural strength. EPSILON® is color neutral, and cured material can be easily sanded, primed and painted. EPSILON® is suitable for use as a protective, impact resistant coating for EPS or polyurethane foam. It can also be applied to plaster, concrete, wood and fabrics. This product is not sensitive to moisture or humidity and contains no VOC's. Size: Quart Kit 2.8Lb
EPSILON® is packaged with a Part "A" base and 101 Fast Hardener yielding a pot life of 15 minutes and re-coat time of 60 minutes. You can also mix Part"A" base with Epoxy Hardener 102 Medium (sold separately) to get a 30 minute pot life. Pot life can be extended by pouring mixture into a flat baking pan and drawing EPSILON® from there to apply.
EPSILON® is a neutral beige color so that you can monitor area coverage when applying over EPS foam. EPSILON® can be pigmented with SO-Strong color tints if required. Tints may be added to every other layer to ensure thorough coverage.
When applying to vertical surfaces, EPSILON® wets out uniformly. A minimum of two layers are required to build an adequate thickness and provide an impact resistant coating. An advantage that epoxy has over urethane for coating EPS foam is that EPSILON® is not moisture sensitive.