*All prices are in Canadian funds.
Shell Shock SLOW Trial kit 3.6Lb (799493)
Shell ShockŪ FAST and Shell ShockŪ SLOW are thixotropic plastics that self thicken when mixed and can be brushed onto a variety of surfaces or into rubber molds. When Parts A and B are mixed in proper proportion (1A:4B by volume or 1A:5B by weight), material cures at room temperature with virtually no shrinkage to a hard, durable plastic that exhibits good compressive and flexural strength. Fully cured castings are rigid and can be sanded, primed and painted. Color effects are possible by adding SO-Strong Color Tints.
Shell ShockŪ plastics are ideal for making fast, lightweight rigid molds for creating silicone appliances and effects (use as a replacement for 'stone molds'). You can also brush a "gel coat" into a rubber mold and back it up with rigid foam, creating a highly detailed lightweight casting. These products can also be brushed onto styrofoam (polystyrol) as an impact resistant coating that can be sanded, primed and painted (minimum 3 coats recommended). Shell ShockŪ plastics can also be used to make rigid support shells for brush on rubber molds.
Shell ShockŪ FAST working time is 3 minutes.
Shell ShockŪ SLOW working time is 8 minutes.
Shell ShockŪ FAST - full cure 1 hour at 3/8" thickness
Shell ShockŪ SLOW - full cure 5 hours at 3/8" thickness