

*All prices are in Canadian funds.

|
TASK 18 Resin Gallon Kit 12.1 Lbs (formerly C-1508) (797470)
TASK 18 (formerly C-1508) is a relatively low viscosity aluminum filled urethane casting resin that was developed specifically for making short run vacuum forming molds. When Parts A and B are mixed in proper proportion, TASK 18 cures overnight at room temperature with negligible shrinkage to a very hard plastic that has a very high compressive and flexural strength. Cured TASK 18 can be polished, machined, drilled, painted, etc. TASK 18 is also used to make industrial production parts, prototype parts and tracing patterns.
Pot Life: 20 min. Cure Time: 16 hours
Refer to the Technical Data Sheet for further information. |