/ REGISTER HERE shopping cart 0 Item(s)
sculpture supply
sculpture supply canada about us contact us ordering events news techinical info videos media
SEARCH
LIQUID PLASTICS
» Crystal Clear 200
» Crystal Clear 202
» Crystal Clear 204
» Crystal Clear 206
» Crystal Clear 220
» Crystal Clear 221
» Feather Lite Lightweight Resin
» SMASH Break-Away Glass
» Smooth Cast 300
» Smooth Cast 300Q
» Smooth Cast 305
» Smooth Cast 310
» Smooth Cast 320
» Smooth Cast 321
» Smooth Cast 322
» Smooth Cast 325 Colormatch
» Smooth Cast 326 Colormatch
» Smooth Cast 327 Colormatch
» Smooth Cast 380 Tool Resin
» Smooth Cast 385 Tool Resin
» Smooth Cast 45D SemiRigid
» Smooth Cast 57D Rotational
» Smooth Cast 60D SemiRigid
» Smooth Cast 61D SemiRigid
» Smooth Cast 65D Rotocast
» Smooth Cast 66D Rotocast
» Smooth Cast ONYX Fast
» Smooth Cast ONYX Slow
» TASK 2
» TASK 3
» TASK 4 Ultra-Thin
» TASK 5
» TASK 6
» TASK 7 Flame Out
» TASK 8 Heat Resistant
» TASK 9 Colormatch
» TASK 11 Semi-Rigid FDA
» TASK 12 Impact Tooling
» TASK 13 Semi-Rigid Fast Set
» TASK 14 Semi-Rigid Slow Set
» TASK 15 Thin-Wall Rotational
» TASK 16 Semi-Rigid Rotocast
» TASK 18 Aluminum Filled
» TASK 21
Home : Liquid Plastics : Smooth Cast 325 Colormatch
 

Min Qty * Price
1 $30.59
12 $29.07

Qty
*All prices are in Canadian funds.

pdf

Smooth Cast 325 Pint Kit 1.9 Lbs (796660)
Smooth-Castâ„¢ 325 ColorMatchâ„¢ is a fast-setting resin that was developed specifically for adding color pigments (Smooth-On So-Strong Pigments) and fillers to achieve true color representation or filler effect. The ColorMatchâ„¢ Series is formulated "color neutral". Pot Life: 2.5 min. Demold: 10 min.

The Smooth-Cast® 325, 326 & 327 ColorMatch® Series plastics are fast-cast resins that were developed specifically for adding color pigments and fillers to achieve true color representation or filler effect. The ColorMatch® Series is formulated "color neutral". Small amounts of pigment will yield accurate, vivid colors from cured castings using So-Strong® tints or Ignite® color pigments. The ColorMatch® Series offers the convenience of a 1A: 1B mix ratio by volume and has a very low viscosity. Demold times range from about 10 minutes to 2-4 hours (depending on product, mass and mold configuration). Note: Large mass castings will get very hot and shrink more, depending on mold configuration.

The ColorMatch® Series also readily accept fillers (such as URE-FIL® 3 from Smooth-On). Because of its neutral color, Smooth-Cast® 325 is ideal for creating marble and wood grain casting effects, or duplicating the look of real metal by adding bronze, brass or other metal powder (see Smooth-On technical bulletin for metal cold casting). Applications for the ColorMatch® Series plastics include making pigmented prototype models or figures, special effect props, reproducing small to medium size sculptures, decorative jewelry, etc.

CREATING A MARBLE EFFECT USING SMOOTH CAST 325 RESIN




How do I remove release agent from my cured urethane casting if I want to prime or paint the casting?
Removing a silicone-based release agent from your cured urethane casting is not easy. The most effective way is to sand blast or bead blast the surface of your casting. However, sand blasting removes a micro thin layer of the casting's surface. If not done properly, you can damage or remove fine detail. Soap Wipe or brush the casting with a soap that has high alkali content. Cascade brand dishwashing gel is highly alkaline and also contains baking soda, which is an advantage. Solvents Wipe or brush the casting with Acetone, Toluene, Isopropyl Alcohol or Mineral Spirits. Important: follow all safety precautions when using flammable liquids. You can then prime and paint your casting.