*All prices are in Canadian funds.
Permalac Satin Finish Gallon (249006)
Permalac lacquer satin finish is formulated to protect metal and other surfaces from weather and outdoor related abuse. This clearcoat protects from heat, cold, wind-borne sand, and salt spray. Permalac has UV and corrosive inhibitors that will not breakdown for years. Once cured, Permalac almost disappears. It does not alter the appearance, texture, or patina of the finish in any way. To obtain a gloss finish apply 4 to 5 coats of Permalac Satin lacquer to surface. Mix with Permalac Thinner No.281 prior to application. Do not allow to completely dry between coats to allow for improved bonding of coats. Hazmat
Coverage: 250 sq.ft./Gallon
PRODUCT ADVISORY: KEEP FROM FREEZING.
May require heated service subject to weather conditions. Additional shipping charges will apply. In such event customer will be notified.
PERMALAC is an air-dry crystal clear, durable lacquer, engineered to provide highly durable exterior protection on steel, aluminum, copper, silver and bronze as well as steel, polyurethane foam, wood, terracotta and concrete. The addition of UV and corrosion inhibitors to PERMALAC assures endurance in harsh conditions ranging from arctic freezing, to desert heat, to beachfront salt air to acid rain.
PERMALAC air dries to the touch in less than 5 minutes and dries hard to a highly durable finish in an hour or so, depending on the film thickness, temperature etc.
It has enabled designers, architects and interior decorators to experiment with patinas and other special finishes and stabilize them as never before.
Additional shipping/handling charges may apply on hazardous material shipments.
Permalac Wood & Metal Adhesion Test
Permalac Salt Water Test
Permalac Surface Preparation
Permalac UV Resistance Testing
How To Use Permalac Bulletin