Bounce Foam Coat Rubberizer 16oz (226923)Bounce Foam Coat Rubberizer makes Foam Coat flexible, highly resistant to cracking on impact, weather proof, strong with application of very thin coats, and improves adhesion.
PRODUCT ADVISORY: KEEP FROM FREEZING. May require heated service subject to weather conditions. Additional shipping charges will apply. In such event customer will be notified.
Mix Bounce Rubberizer liquid 1:1 with dry Foam Coat. Add just a little Foam Coat to make a paste glue for uneven surfaces. Bounce can be used alone as a waterproof coating.
MIXING Use Bounce with no added water for maximum flexibility. Foam Coat becomes more flexible when no or less water is added to the Bounce Rubberizer. Start with 1 part liquid to 1 part Foam Coat, and thin or thicken as desired. Thinning the Foam Coat with more Bounce will not weaken it, and will allow very strong thin layers to be applied, so you don't lose details. Try a mixture of 9 parts Bounce to one part Foam Coat for a super rubbery coating. Thin layers can be applied to verticle and inverted surfaces with little or no sagging.
APPLICATION Fill holes with pasty mixture. To coat large areas add more liquid until thin enough to apply with a paint brush. May be applied as thick as 3/8 inch, but multiple coats are stronger. Looks like smooth stone when dry. Texture surfaces before coating sets. Bounce Rubberizer is compatible with Grit Texturizers.
SET TIME Use within 15 mins. Sets up in 30 mins. Maximum bond and strength in 1 day.
CLEAN-UP Immediately clean tools and brushes with soapy water.